8 通道獨立 DMX 訊號放大器
- 8 Independent Channels for Parallel Zone Control
– Each channel operates independently: Control 8 lighting zones (e.g., stage left/right, audience tiers) without signal overlap;
– Ideal for large venues: Avoids complex signal routing by splitting DMX lines into dedicated paths. - High-Voltage Isolation (1000V–2000V)
– Protects consoles from damage: Prevents voltage spikes from faulty fixtures or lightning strikes;
– Eliminates ground loops: Ensures stable signal quality in installations with multiple power sources (e.g., outdoor generators). - 200M+ Signal Transmission with Regeneration
– Extends DMX range beyond standard limits: Supports long cable runs in outdoor festivals or stadiums;
– Signal regeneration: Cleans and boosts weak signals to maintain accuracy over distances. - RDM Compatibility for Advanced Management
– Remote diagnostics: Check fixture status, DMX address conflicts, or signal strength via RDM-enabled consoles (e.g., MA2, GrandMA);
– Firmware updates: Remotely upgrade device software without physical access.
Request a Quote
Send us your requirements for this product. Product information will be included automatically.
- 產品
- 8 通道獨立 DMX 訊號放大器
- SKU
- BMDS8
描述
技術規格
| 型號 | BMDS8 |
|---|---|
| Parameter Category | 價值與場景導向詮釋 |
| Signal Processing | – 8 independent channels: Each channel with dedicated signal regeneration (no shared amplification); – DMX512/1990 compliance: Supports standard DMX protocol for compatibility with 99% of fixtures and consoles; – RDM support: Bidirectional communication for remote device management (e.g., setting DMX addresses, firmware updates). |
| Isolation & Protection | – Input/output isolation: 1000V–2000V (depending on model) to prevent ground loops and voltage spikes; – Surge protection: Built-in overcurrent/overvoltage protection for outdoor or high-risk environments; – EMI/RFI immunity: Shielded design reduces interference from Wi-Fi, radio signals, or power lines. |
| Transmission Performance | – Max distance: 200m+ (with Cat5e/6 cables) for outdoor venues or large indoor spaces; – Cascadable: Up to 16 units can be daisy-chained to expand control to 128 zones (e.g., stadiums with hundreds of fixtures). |
| Interfaces & Power | – DMX ports: 1×3-pin XLR input, 1×3-pin XLR pass-through, 8×3-pin XLR independent outputs (optional 5-pin XLR available); – Power supply: AC 100–240V 50/60Hz (global compatibility) or DC 12–24V (for mobile setups); – 19″ rack-mount: Fits standard equipment racks for permanent installations (e.g., theaters, control rooms). |
